Choose software
Platform
TOMST Lolly for Android
For phones and tablets
TOMST Lolly on your phone or tablet. It connects to your dataloggers through the TMD Adapter over USB-C, so you can configure devices and download data directly in the field, with no laptop. A month of data at 15-minute intervals comes off the logger in under three seconds. Soil moisture calibration runs on the phone or tablet too, so the app covers the whole field workflow, from setting up a datalogger to converted vol% values.
Coming soon: TOMST Lolly for and . Old Lolly is at the end of its life and is no longer supported. It will stop working with the new datalogger firmware, which we plan to release at the start of 2027. Its successor is TOMST Lolly.
In the field, without a laptop
Data
Connect your datalogger to the phone or tablet through the TMD Adapter over USB-C and download in the field. Once the download is complete, the data is saved on the device as a CSV text file that you can share or transfer for analysis.
The file you need is the data file named after the datalogger's serial number (e.g. data_96626360_2026_07_04_7). Any other files generated are for diagnostics only and do not contain the collected data.
Data file format - every column explainedTime Modes (data collection intervals)
By default, all dataloggers are set to Basic mode. You can change the mode from the "Change mode to" dialog, with the datalogger connected through the TMD Adapter.
Basic Mode
DefaultMeasurements are recorded every 15 minutes, on the quarter hour: 12:15, 12:30, 12:45, 13:00, and so on.
Meteo Mode
Measurements are recorded every 10 minutes, on the clock: 12:10, 12:20, 12:30, and so on.
Smart Mode
Measurements are recorded at 10, 15, 20, 30, 40, 45 and 50 minutes past the hour, and on the hour.
Intensive Mode
Measurements are recorded every 5 minutes, on the clock: 12:05, 12:10, 12:15, and so on.
Hourly Mode
Measurements are recorded every hour, on the hour: 12:00, 13:00, 14:00, and so on.
Experiment mode (1-minute interval) is no longer available in the Android app. Use Old Lolly on Windows if you need it.
Soil moisture calibration
All TMS dataloggers record a raw soil moisture signal (~500-3600). As it is, it shows how the soil's moisture changes - rain, drying and drought stand out clearly - and that is what it is mainly for. Converting it to volumetric soil moisture (0-100 vol%) is optional, and the result is approximate. TOMST Lolly for Android does that conversion on the phone or tablet, so data downloaded in the field is usable without going back to a computer.
Important: the function uses pre-set soil types. For more precise values, calculate your own calibration curve from a soil sample. For details, see the TMS Calibration Handbook (PDF).
First, select the appropriate soil type from the drop-down menu. Note that the Default setting is recommended. See below for instructions on how to insert your own soil composition. Once you have selected the soil type, click "Calibrate" and the data displayed in the Hu column (raw moisture signal ~500-3600) will be converted into volumetric soil moisture (0-100 vol%) in the vol% column. You can then select "Export" to generate a file of converted data or "Calibrate directory" to convert all the data files (in CSV format) from a folder of your choosing.
Shift zero value
Aligns the vol% values if negative values are present.
Show Local time
Displays times converted to local time.
Custom soil composition
You can define your own soil composition and use it alongside the pre-set types.
In the app, open Options and upload your values there.
To customize your setting, insert a line in the following format:
id;name;par_a;par_b;par_c;dens_q;perc_clay;perc_silt;perc_salt;zero
id - the number of your setting
name - the name of your setting
par_a - parabola A
par_b - parabola B
par_c - parabola C
dens_q - density
perc_clay - percentage of clay
perc_silt - percentage of silt
perc_sand - percentage of sand
zero - default value of 0
Once uploaded, your custom setting can be selected like any of the pre-set soil types.
myClim R package
We also recommend the myClim R package for soil moisture conversion and data analysis in general. It was designed by Matěj Man et al. specifically for microclimate data processing. "The myClim package supports a complete workflow for microclimate data handling, including reading raw logger data files, their preprocessing and cleaning, time-series aggregation, calculation of ecologically relevant microclimatic variables, data export and storage" (Man et al., 2023).
